Filtration

Plug-In filter

Description

The plug-in filter can be used in various applications for space-saving installation in existing process plants, such as weighing hoppers, silos, or mixers. The filter elements protrude into the product chamber, and the collected dust is immediately returned to the system.

The filter housings are constructed of welded, dust-tight sheet metal as standard. The filter elements are cleaned pneumatically via a pressurized gas reservoir and special cleaning valves installed on the filter housing.

Design

Installation of filter types such as flat filter hoses, filter hoses, filter bags, filter cartridges, and compact elements
Filter media made of various materials such as polyester, aramid, PTFE, stainless steel mesh, glass mesh, ceramic, etc.
Filter media with a wide variety of finishes such as PTFE membranes, oil and water repellent, food grade in accordance with EU Regulation 10/2011, spark arrestors, antistatic, etc.
Materials: S235, P265GH, 1.4301, 1.4541, 1.4571, 1.4539, 2.4602, 2.4610 and many more
Vacuum operation -1 bar / 0 bar absolute
Pressure vessel > 0.5 bar according to Directive 2014/68/EU
Heating or cooling by means of double jacket, half-pipe coils, electric trace heating
Housing including contact protection or insulation
Sound-reducing insulation of the housing and attachments
High-temperature design up to 550°C
Pharmaceutical/food-compliant design
Design in accordance with ATEX Product Directive 2014/34/EU
Explosion-proof or explosion-pressure-resistant design in accordance with VDI 2263
With explosion pressure relief, such as a bursting disc or flameless pressure relief

Customer Value

Compact design
Variable designs (square or round)
Individual, customer-specific design
The filter medium is selected depending on the product or its properties and the operating conditions
A wide variety of filter media designs can be used
Self-sufficient operation
Low maintenance

3D-model plug-in filter